page . 1 january 31,2013-rev.04 S2A-AU~s2m-au features ? plastic package has underwriters laboratory flammability classification 94v-o ? for surface mounted applications ? easy pick and place ? glass passivated iunction ? lead free in comply with eu rohs 2011/65/eu directives ? green molding compound as per iec61249 std. . (halogen free) ? acqire quality system certificate : ts16949 ? aec-q101 qualified mechanical data ? case: jedec do-214aa molded plastic ? terminals:solder plated, solderable per mil-std-750,method 2026 ? polarity: indicated by cathode band ? standard packaging: 12mm tape (eia-481) ? weight: 0.003 ounce, 0.092 gram surface mount rectifier maximum ratings and electrical characteristics ratings at 25c ambient temperature unless otherwise specified. single phase , half wave ,60hz, resistive or inductive load. for capacitive load , derate current by 20%. notes: 1.measured at 1.0 mhz and applied vr=4.0 volts. 2.8 x 8mm 2 pads. voltage 50 to 1000 volts 2 amperes current 1 2 cathode anode parameter symbol S2A-AU s2b-au s2d-au s2g-au s2j-au s2k-au s2m-au units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward current at t l =110 o ci f(av) 2a peak forward surge current : 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 60 a maximum forward voltage at 2a v f 1.1 v maximum dc reverse current at rated dc blocking voltage t j =25 o c t j =125 o c i r 1 125 ? a maximum junction capacitance (note 1) c j 30 pf typical junction resistance (note 2) r ? jl 16 o c / w operating junction and storage temperature range t j ,t stg -55 to +150 o c 0.083(2.11) 0.075(1.91) 0.185(4.70) 0.160(4.06) 0.096(2.44) 0.083(2.13) 0.050(1.27) 0.030(0.76) 0.220(5.59) 0.200(5.08) 0.012(0.305) 0.006(0.152) 0.155(3.94) 0.130(3.30)
page . 2 january 31,2013-rev.04 S2A-AU~s2m-au fig.1 forward current derating curve fig.5 typical junction capacitance rating and characteristic curves 3.0 2.0 1.0 0 050100150 0.5 1.5 2.5 lead temperature, c o reverse voltage, volts single phase half wave 60hz resistive or inductive load p.c.b mounted on 0.3 x 0.3" (8.0 x 8.0mm) copper pad areas average forward rectified current, amperes junction capacitance,pf fig.2 maximum non repetitive peak surge current no. of cycles at 60hz peak forward surge current, amperes 50 40 30 20 10 0 1 2 610 20 4060100 60 1 0 0.1 1.0 100 1 2 5 10 20 50 100 t=25c f=1.0mhz vsig=50m vp.p j o fig.2 typical forward characteristics instantaneous forward voltage, volts instantaneous forward current, amperes 0 0.001 0.01 0.1 1.0 10 0.2 0.4 0.6 0.8 1.0 1.2 t=25c a o fig.3-typical reverse characteristic instantaneous reverse current a percentage of peak reverse voltage, % 0.01 20 40 60 80 100 120 140 0.1 1.0 10 100 t=125 c o j t=100 c j o t=25c j o
page . 3 january 31,2013-rev.04 S2A-AU~s2m-au mounting pad layout order information ? packing information t/r - 3k per 13" plastic reel t/r - 0.5k per 7" plastic reel
page . 4 january 31,2013-rev.04 S2A-AU~s2m-au part no_packing code_version S2A-AU_r1_000a1 S2A-AU_r2_000a1 for example : rb500v-40 _ r2 _ 00001 part no. serial number version code means hf packing size code means 13" packing type means t/r packing code xx version code xxxxx packing type 1 st code packing size code 2 nd code hf or rohs 1 st code 2 nd ~5 th code tape and ammunition box (t/b) a n/a 0 hf 0 serial number tape and reel (t/r) r 7" 1 rohs 1 serial number bulk packing (b/p) b 13" 2 tube packing (t/p) t 26mm x tape and reel (right oriented) (trr) s 52mm y tape and reel (left oriented) (trl) l panasert t/b cathode up (pbcu) u forming f panasert t/b cathode down (pbcd) d
page . 5 january 31,2013-rev.04 S2A-AU~s2m-au disclaimer ? reproducing and modifying information of the document is prohibited without permission from panjit international inc.. ? panjit international inc. reserves the rights to make changes of the content herein the document anytime without notification. please refer to our website for the latest document. panjit international inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ? panjit international inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ? applications shown on the herein document are examples of standard use and operation. customers are responsible in comprehending the suitable use in particular applications. panjit international inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ? the products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify panjit international inc. for any damages resulting from such improper use or sale. ? ? since panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.
|
